Electronic Products & Technology


Sector
Contract Manufacturing


Product
November 15, 2017 by Stephen Law

Electrically conductive die attach adhesive boosts thermal conductivity

MASTER BOND EP3HTSDA-1 single part, no mix epoxy adhesive for die attach applications exhibits a die shear strength of 20-22 kg-f and has a high thermal conductivity of over 40-45 BTU•in/ft2•hr•°F [5.7-6.5 W/(m•K)]. The 100% solids formulation provides a suitable…
Product
November 6, 2017 by Stephen Law

Bi-directional 15kW / 500V dc power supply

GLOBAL TEST SOLUTIONS DELTA SM500-CP-90 15kW standard power supply provides a bi-directional output and operates easily. Unit provides a flexible constant power output characteristic-the lower the voltage, the higher the current. For example: 500V = -30 to +30A; 250V = -60…
Product
November 4, 2017 by Stephen Law

Cutter for marking material improves printing convenience

WAGO smartCUTTER automates cutting of marking material on firm’s compact smartPRINTER (Version 1.1) – a thermal transfer printer, used as a terminal block labeling system. smartPRINTER device prints and cuts a wide range of marking materials for terminal blocks, cables…
Product
November 3, 2017 by Stephen Law

Analog simulator reduces risk and time to market

MICROCHIP TECHNOLOGY MPLAB Mindi analog simulation software is a circuit simulation tool that supports more than 300 of firm’s analog products, with SIMetrix’s enhanced SPICE (Simulation Program with Integrated Circuit Emphasis) and SIMPLIS Technologies’ SIMPLIS (SIMulation of Piecewise LInear Systems) simulation…
Product
November 2, 2017 by Stephen Law

Software system delivers real-time insight into reflow, wave soldering

KIC Vantage network software system provides a real-time dash-board for thermal processes, accessible anywhere, from any authorized PC or mobile device. The process data is automatically stored in a central location where the engineer can quickly retrieve and share all…
Product
November 1, 2017 by Stephen Law

Digital hot air pencil solves light rework jobs

METCAL HCT2-200 Digital Hot Air Pencil is a digital handheld convection tool for use in light rework applications that use smaller components and integrated circuits. As component miniaturization continues (e.g. 01005 components), the ergonomics of a pencil become more important…
News
October 29, 2017 by Stephen Law

Dorigo’s EMS processes re-certified to ISO 9001:2015 Standard

Burnaby BC’s EMS player achieves industry leadership in technical capability and quality electronics assembly
Product
October 28, 2017 by Stephen Law

Aerosol cleaning product meets green standards

MICROCARE Universal Flux Remover uses specialized chemistries to help companies clean pcbs faster, while meeting more stringent European environmental regulations. The aerosol product is a medium-strength flux and paste remover, suitable for cleaning electronics during rework and repair, spot cleaning…
Product
October 23, 2017 by Stephen Law

Nylon-based thermoplastic elastomer filaments serve 3D printing

DuPont Hytrel thermoplastic elastomer and DuPont Zytel nylon-based thermoplastic elastomer filaments for 3D printing allow users to achieve the true benefits of 3D printing (greater design freedom, lightweighting, reduced product development cycle times) allowing for rapid functional prototyping, parts production,…
Product
October 22, 2017 by Stephen Law

Circuit materials electrical, thermal/mechanical demands

ROGERS RO1200 circuit materials meet the electrical and thermal/mechanical demands of high-speed designs, helping to maximize data throughput and minimize latency. With a low dielectric constant (Dk) of 3.05 and a maximum dissipation factor of 0.0017 @10 GHz, products provide…
Product
October 18, 2017 by Stephen Law

Push-in wire connectors serve as alternative to traditional twist-on style

BLOCKMASTER WPC300 Clear Connects Series of push-in wire connectors provide a fast and easy alternative to traditional twist-on wire connectors, now available for LED lighting applications.  Suitable for prefabricated wiring systems, products provide screwless connection technology. Installers no longer have…
News
October 16, 2017 by EP&T Magazine

Sun Chemical enters license agreement with NRC, GGI

Plan is to introduce new screen printable molecular inks