Electronic Products & Technology


June 13, 2020 by Stephen Law

Adhesive is thermally conductive, electrically insulating

DELO MONOPOX TC2270 electronic adhesive is both thermally conductive and electrically insulating and shows good strength even after standardized humidity tests with subsequent reflow cycles. Product ensures fast heat transfer and long-term reliable operation of semiconductors in power electronics. The…
November 12, 2019 by Stephen Law

Chemically resistant epoxy sealant is thermally conductive

MASTER BOND EP62-1AO two-part epoxy adhesive and sealant with a long working life of 12-14 hours at ambient temperature for a 100 gram mass. This makes it beneficial when bonding and sealing large or intricate parts that may need ample…
October 10, 2019 by Stephen Law

Adhesive delivers fast room temperature cure

DOW CHEMICAL DOWSIL EA-4700 CV two-part, fast room temperature cure adhesive provides durable adhesion to typical substrates used in automotive electronics (i.e., aluminum, PBT, PPS). Product delivers room temperature fast cure or heat accelerated cure. Product has controlled silicone volatility…
September 18, 2019 by Stephen Law

Hybrid epoxy boosts chemical resistance

MASTER BOND EP21TP-2NV two part epoxy polysulfide is formulated for use as an adhesive, sealant and potting system. Product withstands prolonged exposure to many harsh chemicals including fuels, oils, hydrocarbons and hydraulic fluids. It is also fully RoHS compliant, meeting…
May 14, 2019 by Stephen Law

Electrically-conductive silicone adhesive addresses EMI shielding challenges

DOW DOWSIL EC-6601 Electrically Conductive Adhesive is a next-generation material engineered for reliable performance and electromagnetic compatibility (EMC) in demanding electrical and electronics applications in the transportation, communications and consumer markets. Product combines strong electromagnetic interference (EMI) shielding capabilities across…
March 23, 2019 by Stephen Law

Component adhesive boosts thermal conductivity

ENGINEERED MATERIAL SYSTEMS TM-6520 low temperature cure adhesive is designed for die attach and general circuit assembly applications. Product is electrically insulating and provides high thermal conductivity of 1.7 W/°K and cures in 60 minutes at 70°C or 20 minutes…
March 13, 2019 by Stephen Law

Silver conductive, one component epoxy cures at 80°C

MASTER BOND Supreme 3HTS-80 one part, silver filled epoxy adhesive is not premixed and frozen and features an unlimited working life at room temperature. Product cures at 175°F to 185°F within 2-3 hours – unlike typical heat activated epoxies that…
February 4, 2019 by Stephen Law

Nanosilica filled LED curable adhesive is biocompatible

MASTER BOND LED405Med is a one component, LED curing adhesive system that meets ISO 10993-5 cytotoxicity requirements for use in medical device assembly. Product has a nanosilica filler resulting in both lower shrinkage upon cure, as well as improved dimensional…
September 26, 2018 by Stephen Law

Assembly film boosts reliability, adhesion at high temps

HENKEL LOCTITE ABLESTIK CF 3366 epoxy-based, silver-filled film adhesive provides high thermal and electrical conductivity, delivering improved heat dissipation capabilities for robust thermal management. Leapfrogging other commercial assembly films, product addresses miniaturization trends, increasing power density demands and high operating…
September 17, 2018 by Stephen Law

Strong epoxy adhesive is thermally stable

MASTER BOND EP70CN two part, thermally stable epoxy adhesive is formulated using a natural, renewable and sustainable ingredient. Epoxy system forms high physical strength bonds and can be utilized for bonding, sealing, coating and potting. Product’s tensile strength is 11,000…
March 28, 2018 by Stephen Law

Curable epoxy adhesive seals, coats, encapsulates

MASTER BOND EP42HT-3AO Two part, room temperature curable epoxy adhesive, sealant, coating and encapsulating system is thermally conductive, electrically insulating epoxy for bonding, sealing, coating and encapsulation applications. Product is relatively easy to use with a forgiving 100 to 40…
May 30, 2017 by Stephen Law

Cyanocrylate adhesive combines dual bond and quick cure

NTE ELECTRONICS SureHold 78-22021 Helios Light Cure Cyanocrylate Adhesive combines a dual bonding technology and a premium high quality glue with a speedy light cure. Industrial strength product cures with UV/visible light in instant and photo-cure. Suitable for sensitive electronic…