Electronic Products & Technology

Non-contact hall effect sensor with life cycle up to 10 Million rotations


Electronics CEL

BI Technologies has
developed a non-contact single-turn Hall Effect sensor. The MagnePot
Model 6120 Hall Effect position sensor features extremely low
mechanical torque with a programmable electrical angle from five to 360


The MagnePot Hall Effect position
sensors are available in three standard styles as well as custom
configurations: 1/8″ shaft, 1/4″ bushing; 1/8″ shaft, 3/8″ bushing; and
1/4″ shaft, 3/8″ bushing. Standard independent linearity is ±0.5%, with
tighter linearity available on spec units. Typical output voltage
ranges from 0.25Vdc to 4.75Vdc, while input voltage ranges from 4.5Vdc
to 5.5Vdc. Minimum insulation resistance is 1,000MΩ, and operating
temperature ranges from -40°C to +125°C.



For more on Sensors, click here


Stories continue below

Print this page

Related Stories