Electronic Products & Technology



Product
October 5, 2018 by Stephen Law

Convection cooled dc-dc converters accept up to 1400Vdc

ABSOPULSE ELECTRONICS HVT 350-F7 350W addition to its line of dc-dc converters designed for heavy-duty industrial applications that require high dc-input voltage and wide dc-input ranges. Devices accept 1100Vdc nominal input with an operating voltage range of 900Vdc to 1300Vdc,…
Product
September 22, 2018 by Stephen Law

Dc-dc converter lowers current consumption to 180nA

ROHM BD70522GUL ultra-low-power dc-dc converter with a current consumption of 180nA, features dimensions of 1.76mm x 1.56mm x 0.57mm and switching frequencies of between 0 and 1MHz, depending on the load. Device works with supply voltages from 2.5V to 5.5V.…
Product
July 31, 2018 by Stephen Law

3W dual output dc-dc converter comes in SIP6 package

AIMTEC AM3A-Z 3-Watt single and dual output dc-dc converter comes in a compact SIP6 package with a 4:1 ultra-wide input range, from 4.5-75Vdc. Device comes with 1600Vdc isolation and a regulated output. Product’s compact design comes with a high efficiency up…
Product
July 18, 2018 by Stephen Law

Fully regulated dc-dc converter requires no fan or heatsink

ETA-USA ET Series fully regulated dc-dc converter does not require heatsinks, no added circuitry and no fan. The efficient, isolated, fully regulated and stand-alone product delivers 97% power efficiency and uses firm’s patented design to boost its efficiency. RoHS compliant…
Product
February 16, 2018 by Stephen Law

¼ Brick dc-dc converters rated at 100W and 150W

Polytron Devices QB100 and QB150 series ¼ Brick dc-dc converters boast 100 and 150 watt ratings, respectively and provide a 4:1 ultra-wide input range and operating temperature of -40 to +110°C. QB100 series offers high efficiency up to 93% and…
Product
February 3, 2018 by Stephen Law

Dc-dc converter delivers adjustable output current or voltage

BETA DYNE AC1200 12Watt isolated dc-dc converter comes with adjustable output current or voltage. Unit accepts 0 to 10V at it’s VC control input and generates an output current from 0 to 2A. Additional features includes output over voltage protection,…
Product
January 28, 2018 by Stephen Law

¼ brick dc-dc converter serves battery powered applications

CALEX QRW series of dc-dc converters are housed in an industry standard ¼ brick package and provide an input range of 9 to 18Vdc, suitable for applications powered by a 12V battery. Two models are available: 3.3Vout and 5Vout, both…
Product
October 21, 2017 by Stephen Law

Dc-dc converter tool empowers designers at all expertise levels

MAXIM INTEGRATED EE-Sim dc-dc converter design and simulation tool power designers can create and simulate complex circuits with more confidence. Novices can create designs in a few minutes, while experts wield a high degree of control over simulation parameters and visualizations.…
Product
October 11, 2017 by Stephen Law

Dc-dc converter range serves embedded applications

MURATA OKI-78SR series of non-isolated switching regulator dc-dc power converters for embedded applications. The fixed single output converter provides both tight regulation and high efficiency directly at the power usage site and is a direct plug-in replacement for TO-220 package…
Product
August 1, 2017 by Stephen Law

Dc-dc converters boost isolation for industrial power installations

MURATA MGJ6 series high isolation dc-dc converters deliver are wide and low-profile providing a 14mm creepage and clearance distance for use in reinforced-rated isolated-gate drive-power applications in higher efficiency 690Vac industrial electrical distribution systems. Devices provide optimized voltages for best…
Product
February 22, 2017 by Stephen Law

120mA dc-dc converter specialized for IGBT driver

MORNSUN QAxx1 Series 120mA dc-dc converter is specialized for IGBT driver. Devices integrate IC’s features and provide +15/-8.0Vdc asymmetrical output voltage. With output current up to 120mA, devices meet a wider power requirement of IGBT. Product series delivers high efficiency up…
Product
December 14, 2016 by Stephen Law

Dc-dc converter boosts power density

MURATA MYMGK series of miniature ‘Mono Block’ type surface mount point-of-load (PoL) dc-dc converters are non-isolated and available in two models, a 6 Amp (MYMGK1R806FRSR) and a 20 Amp. Each version is available with two output voltage range options. Devices…