Electronic Products & Technology



Product
February 1, 2019 by Stephen Law

Waterproof USB micro B, type C receptacles deliver IP67 ratings

CUI INTERCONNECT Waterproof USB connectors with Ingress Protection (IP) ratings of IP67, provide protection from moisture and environmental contaminants. Devices are available in USB Micro B and Type C receptacle formats, while conforming to either the USB 2.0 or USB…
Product
January 25, 2019 by Stephen Law

Connectors with simple push-on mating design

AMPHENOL SV SMPM connectors for high density, high-frequency applications provide microwave performance through 65GHz and less than .140-inch center-to-center spacing. Devices are suitable when minimum board separation width is needed. Devices are available in multiple configurations to accommodate any board-to-board…
Product
January 21, 2019 by Stephen Law

Wire-to-wire connectors leverage full keying, color-pairing

MOLEX Foolproof CP 3.3 family of wire-to-wire connectors leverage full keying and color-pairing, while enhancing user-safety and preventing moisture seepage in consumer electronics, white goods, industrial and medical applications. Available in single and dual row layouts from 2 thru to…
Product
December 23, 2018 by Stephen Law

Connector range includes female cable interconnect

BINDER USA 825 Series M12 X-coded cable connectors come with a female cable connector and RJ45 to female feedthrough for control cabinets. Devices provide data transmission 4-paired up to 10Gbit/s. Devices are available straight or angled with 8 gold-plated contacts.…
News
December 8, 2018 by EP&T Magazine

Harting notches double-digit sales growth

Achievement ‘pushes’ German interconnect group ahead
Product
November 29, 2018 by Stephen Law

Interconnect solutions designed for industrial applications

ERNI SMC Series of dual row SMC small form 1.27 mm [.050″] pitch connectors supports a wide range of industrial applications, providing multiple connector configuration options. Supporting both board-to-board and wire-to-board applications, connector family is suitable for a wide range…
Product
November 15, 2018 by Stephen Law

Heat shrink insulated solder butt connectors form reliable connection

NTE 76-HISBC series heat shrink insulated solder butt connectors – once heated, dispense solder to the wires being joined via an internal fluxed solder ring, establishing the best chance for a reliable connection. No crimping is required. Devices can be…
Product
September 4, 2018 by Stephen Law

Power connectors solve key design challenges

SAGER ELECTRONICS Molex Ultra-Fit power connectors solve four key design challenges while providing the premium housing features of proven Mini-Fit and Micro-Fit 3.0 connector systems: color-coded housings mitigate the risk of mis-mating, optional TPA retainers significantly reduce terminal back-out, the…
Product
August 30, 2018 by Stephen Law

Solderless connectors deliver operating frequency up to 50GHz

PASTERNACK Solderless vertical launch connectors are suitable for high-speed networking, high-speed computing and telecommunications applications. Product series consists of 12 models that provide VSWR as low as 1.3:1 and maximum operating frequency of up to 50GHz, depending on the model.…
Product
August 3, 2018 by Stephen Law

12mm mated connectors comply with ANSI/VITA 42.0 XMC standard

SAMTEC 12mm stack heights of connector sets comply with recent ANSI/VITA 42.0 XMC standard, which defines an open standard for supporting high-speed, switched interconnect protocols on an existing, widely deployed form factor. Product revision further defined the concept for the…
Product
July 21, 2018 by Stephen Law

Connectors boost mating tolerance, withstand up to +125°C

KYOCERA 5656 Series electronic Board-to-Board connectors provide 0.5mm pitch and a proprietary floating structure that delivers the high mating tolerance with heat resistance up to +125°C. Devices deliver heat resistance up to +125°C and a proprietary floating mechanism that provides…
Product
June 4, 2018 by Stephen Law

Connectors boost performance on low loss cables

AMPHENOL RF Redesigned TNC connectors are optimized for use with Low Loss 195 and 240 cables, which provide enhanced shielding with a bonded foil construction ensuring 100% coverage. Devices provide a nominal impedance of 50 ohms and low return loss…