Electronic Products & Technology



Product
February 23, 2020 by Stephen Law

Surface-mount monopole antenna serves embedded LTE, cellular IoT

LINX TECHNOLOGIES Splatch SP610 surface-mount monopole antenna is suitable for embedded LTE and cellular IoT (LTE-M and NB-IoT) applications. Product specifically supports low-frequency LTE bands from 698MHz to 960MHz, notably the 700MHz bands, and 1710MHz to 2700MHz making it suitable…
Product
February 11, 2020 by Stephen Law

mmWave antenna solution integrates into pcb

PERASO TECHNOLOGIES PER-PAx patented series of phased array antenna solutions complement firm’s 802.11ad chipsets. Units provide a cost-effective means to increase system performance and cover the extremely wide bandwidth allowed in the unlicensed 60GHz band. Units feature multi-layer construction, optimized…
Product
December 4, 2019 by Stephen Law

Small cell antenna supports wireless applications

HUBER+SUHNER SENCITY Occhio MIMO DAS (Distributed Antenna System) or small cell antenna, provides the operator 5G coverage, a simple, time-saving installation process and an attractive industry preferred design with a small form factor. Product supports todays and future wireless applications…
Product
July 16, 2019 by Stephen Law

WiFi/WLAN antenna serves embedded surface-mount designs

LINX TECHNOLOGIES nanoSplatchTMnSP250 dual-band WiFi/WLAN antenna for embedded surface-mount applications, especially in compact or portable devices targeting WiFi/WLAN and other 2.4GHz or 5.8GHz ISM frequency band technologies such as Bluetooth and ZigBee. The surface-mount device uses 80.6mm2 of board space,…
Product
June 8, 2019 by Stephen Law

Tiny embedded antenna serves dual-band WLAN

ANTENOVA Minuta ultra-compact dual-band Wi-Fi tiny embedded antenna for M2M and IoT designs is ceramic and measures 1.0mm x 0.5mm x 0.5mm. Product was developed for the newer 4.9-5.9GHz frequency which is less cluttered than 2.4-2.5GHz  and gives enhanced performance…
Product
February 22, 2019 by Stephen Law

Small on-board device integrates LTE CatM1 in a blade antenna

ANTENOVA Part # SR4G055 blade antenna for LTE Cat M1. LTE Cat M1 is an IoT-friendly version of LTE that provides enough bandwidth for data communication whilst maintaining a long battery life. Device measures 41.0 x 22.0 x0.9mm and this OBDII…
Product
December 10, 2018 by Stephen Law

Ultra low-profile DAS antenna delivers broad coverage

LAIRD CONNECTIVITY CFSA35606P thin, ultra low-profile DAS antenna provides a broad range of frequency coverage. Device is a low PIM, ceiling mounted antenna with omnidirectional pattern coverage optimized for indoor DAS coverage at 350-520, 600-960, 1350-1550, and 1690-6000MHz for the…
Product
September 28, 2018 by Stephen Law

GNSS active antenna module with LNA and SAW is ultra-small

ANTENOVA RADIONOVA M20047-1 active antenna module for GNSS applications in the 1559-1609MHz satellite bands using GPS, GLONASS, GALILEO or BeiDou, comprises an SMD antenna with built-in active components. Suitable for for tiny positioning devices, module includes an LNA filter and…
Product
June 20, 2017 by Stephen Law

Low-profile antennas adhere to metal surfaces

ANTENOVA REFLECTOR series Zenon (part number SR4W030) family of low-profile antennas operate without de-tuning on metal surfaces – or where the product housing is mainly metal – a situation where it is normally extremely difficult for an antenna to operate.…
Product
March 14, 2017 by Stephen Law

Chip antennas suited to new NB-IoT standard

Latona, (part no. SR4C033) L and R chip antenna for the new Narrow Band IoT (NB-IoT) standard is small and measures 20 x 11 x 1.6mm. Device is built to a novel design boosting performance, while easily integrating onto a…