Electronic Products & Technology


Products


Product
December 3, 2018

PAM4 Modules boost verification accuracy of high-speed optical devices

ANRITSU MP1900A 64-Gbaud PAM4 Pulse Pattern Generator (PPG) and 32-Gbaud PAM4 Error Detector (ED) modules supporting 400GbE and Over 400G bit error rate (BER) tests for its Signal Quality Analyzer-R MP1900A BERT. With the modules installed, unit provides best-in-class signal quality

Product
December 2, 2018

12.1″ WXGA display withstands harsh industrial use

TIANMA NL12880AC20-20D wide-format display module in Active Matrix Technology (TFT) withstands industrial conditions and provides an operating life of the LED backlight unit of 50,000 hours. Device is reliable at -20 degrees Celsius to +70C. With its integrated LED lighting

Product
December 1, 2018

Energy harvesting embedded controller operates on untouched current levels

RENESAS R7F0E energy-harvesting embedded controller eliminates the need to use or replace batteries in IoT devices. Developed on firm’s SOTB (silicon-on-thin-buried-oxide) process technology, device achieves extreme reduction in both active and standby current consumption, a combination that was not previously

Product
November 30, 2018

MEMS ultrasonic time-of-flight sensor is immune to ambient noise

TDK Chirp MEMS ultrasonic time-of-flight (ToF) sensors are immune to ambient noise and work in direct sunlight. Devices are robust, accurate and reliable, as well as small enough to fit into consumer electronics devices such as smartphones and wearables. Devices

Product
November 30, 2018

Robust SMT D-sub connectors reduce space requirements

C&K SMT space-grade D-Subminiature (D-Sub) surface mount termination (SMT) range of electrical connectors, under CS-FR053 specification, reduce weight and save space on pcbs, while ensuring straightforward implementation and operational reliability. Suitable for use in space and avionics applications, devices do

Product
November 30, 2018

Fan-to-heatsink IC cooler saves space

JARO THERMAL SQUARE IC 2 Fan-to-heatsink IC cooler is black, anodized and measures a compact 40x40x08mm, making it suitable for low-profile (tightly spaced) applications. Product’s embedded fan-to-sink design reduces IC installation steps, while saving time and space. Device is ideal for

Product
November 29, 2018

3U VPX Virtex UltraScale+ FPGA Board delivers 5.4GSPS 12-bit ADC, 6GSPS 12-bit DAC

VADATECHVPX570 low-latency RF ADC/DAC module with ADC supporting rates up to 5.4 GSPS and a DAC supporting rates up to 6 GSPS, both at 12 bits. The EV12DS460A and EV12AS350A both have parallel interfaces to the FPGA, avoiding latency associated with serializing/deserializing

Product
November 29, 2018

Interconnect solutions designed for industrial applications

ERNI SMC Series of dual row SMC small form 1.27 mm [.050″] pitch connectors supports a wide range of industrial applications, providing multiple connector configuration options. Supporting both board-to-board and wire-to-board applications, connector family is suitable for a wide range

Product
November 28, 2018

Ceramic fuse sustains high inrush currents

SCHURTER SUT-H 6.3x32mm ceramic fuse with a rated current range from 10A to 50A is suitable for applications with high inrush currents. Device provides a high melting integral, which makes it extremely pulse resistant to high inrush currents, as in

Product
November 28, 2018

One component epoxy meets low outgassing specs

MASTER BOND EP17HTND-CCM single component epoxy is not premixed or frozen and is more convenient to handle, apply and store than typical two component glob top systems. The black, heat curable compound has a flowable paste consistency suitable for glob

Product
November 27, 2018

Power supplies are easy, safe to operate

ROHDE & SCHWARZ NGE100B power supply series is particularly easy and safe to operate, making it suitable for various applications in education and production as well as in R&D labs. The robust instruments have galvanically isolated channels and safety binding

Product
November 27, 2018

High thermal solder alloys deliver impact reliability

SHENMAO AMERICAPF906-S and PF912-S high thermal/drop reliability series solder alloys can be used in a wide range of solder applications. Products have a similar operating temperature window to Sn-Ag-Cu alloys, so that they can easily be adopted into existing packaging