Electronic Products & Technology


Products


Product
February 9, 2010

Custom push-lock connector snaps on in high vibration applications

Aviel Electronics SMB connector is a follow-on design to the SMA and provides a smaller interface with a snap-on coupling for high vibration environments. A push-lock feature has been added to the standard MIL-STD-348 snap-on coupling SMB design, increasenig the

Product
February 9, 2010

Modular component mounter built on single casting base

JUKI KE-2080 sixth generation high-speed modular flexible component mounter is built on the one-piece SuperCast single casting base that includes the Y beams. Combined with firms LNC-60 high-resolution 360-degree component laser centering system and an improved magnascale resolution down to

Product
February 8, 2010

VCO operates from 500-1000MHz

Crystek CRBV55CW-0500-1000 RedBox VCO (Voltage Controlled Oscillator) operates from 500MHz to 1000MHz with a control voltage range of 0.5V~18.0V. Device provides a typical phase noise of -104dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +7dBm. Product

Product
February 8, 2010

Synchronous step-down LED driver delivers 20A of continuous current

Linear Technology LT3743 synchronous step-down dc-dc converter delivers constant current to drive high current LEDs. Device has a 5.5V to 36V input voltage range and provides up to 20A of continuous LED current from a nominal 12V input, delivering in

Product
February 5, 2010

RF-enabled wireless memory enables data collection

Ramtron MaxArias WM710xx wireless memory product line combines the low power, high speed and high endurance of firms nonvolatile F-RAM memory technology with wireless access to enable innovative data collection capabilities for a broad range of applications. Devices provide passive

Product
February 5, 2010

Weight indicator interfaces with strain gauge load cell base

Setra SuperView weight indicator interfaces to strain gauge load cell bases. Unit provides NEMA 4X washdown enclosure and menu-driven programmability. Equipped with graphic LCD display and RGBW backlight, unit will drive up to 12 to 350ohm load cells and provides

Product
February 4, 2010

Pluggable pcb connector pushes in quickly

Weidmuller BLF Series pluggable printed circuit board push-in connector plugs provide timesaving push-in termination technology. Devices provide fast and easy tool-free termination, with 20% reduction in wire pull out force when compared with screw clamping termination. Products come in 5.00mm

Product
February 4, 2010

Enviro hook-up wire is smaller, more robust than PVC

Alpha Wire EcoWire hook-up wire uses a modified polyphenylene ether (mPPE) thermoplastic that is inherently lighter, tougher and more flame resistance than PVC. The result is UL AWM wires that are smaller than their PVC-based counterparts. The non-halogenated insulation contains

Product
February 3, 2010

Surface mout pin diode switches reach 100W

Aeroflex RoHS compliant, Silicon PIN Diode surface mount high power Switches are suitable for higher power, higher linearity RF and Microwave applications for Military Radio, IED, MRI and WiMAX markets. The low profile, compact, surface mount component, (8mm L x

Product
February 3, 2010

Sunlight readable TFT operates in wide temperature range

OSD Displays G154I1-L01 is a 15.4-inch diagonal TFT panel that provides wide operating and storage temperature ranges and long-term production support of at least 3 to 5 years from initial release. Unit provides wide viewing angles, 1280×800 WXGA resolution, wide

Product
February 2, 2010

White LED backlit display is light readable

Densitron Chameleon LCD Family adds 3″ Arctic white LED backlit display provides a brilliant display for both sunlight and night time conditions. Measuring 85mm x 55mm with a 3″ diagonal area and gray scale driver, device improves presentation regardless of

Product
February 2, 2010

Compact, high-speed machining center mills most materials

Datron M75 compact high-speed machining center provides a 30,000RPM spindle and a 59×55-inch footprint for milling, drilling and engraving aluminum, plastics, stainless steel, brass and exotic composites. The German-made machine has a solid granite machining table provides 20×20-inch of work