Electronic Products & Technology

Miniature enclosures optimized for USB interconnect

Stephen Law   

Thermal management Engineering enclosures

HAMMOND 1551USB IP54 ABS enclosures are miniature with three new sizes: 35, 50 or 65mm long, 20, 25 or 30mm wide respectively, all 15.5mm high. Products can house small printed circuit boards using USB as the external power and signal interconnect and provide generous room to prototype builders and small volume OEMs. Built as a traditional lid and base design, all versions provide a dedicated cut-out for a standard USB Type A plug in one end and have a recess in the lid for an inlay, label or HMI keypad. The two smaller units have two pcb standoffs molded into the base; the largest one has four. Each size is available in five colors with a satin texture finish as standard: RAL 9011 black, RAL 7035 grey, translucent clear, translucent smoke and translucent red. Custom colors can be supplied. http://www.hammondmfg.com/1551USB.htm

~Hammond miniature enclosures




Stories continue below

Print this page

Related Stories