Electronic Products & Technology


August 16, 2015 by Stephen Law

Coaxial connectors provide intermodulation performance

SAN-TRON SRX family of low-PIM Coaxial connectors includes high-performance adapters, connectors (including new 4.1/9.5 mini-DINs) and cable assemblies. Products provide intermodulation performance as low as -168dBc with an eSeries 7/16 connector terminated on flexible-141 cable. Typical performance across the lineup…
August 14, 2015 by Stephen Law

75 ohm coaxial cable assemblies boosts broadcast applications

AMPHENOL RF 200 pre-configured cable assembly configurations suitable for the broadcast market provide True 75 Ohm performance to ensure low signal distortion and flawless broadcast transmission. Products are available in various configurations utilizing the BNC, HD-BNC, and 1.0/2.3 coaxial interfaces…
August 12, 2015 by Stephen Law

M12x1 sockets are field attachable

CONEC M12x1 sockets are field attachable, suitable for individual applications that require flexibility when a device is connected. The male socket M12x1 meets these requirements. The socket housing can be mounted from the front (outside) and the contacts and the…
August 8, 2015 by Stephen Law

Connection system delivers seal technology

MOLEX ML-XT Sealed Connection System reliable, securely sealed solution minimizes electrical failures in gruelling commercial vehicle applications while delivering assembly cost savings. Rated IP68 and J2030 power-wash capable, system provides a one-piece plug housing and seal design, which is permanently…
August 5, 2015 by Stephen Law

Panel mount dc power jacks come in industry standard sizes

NTE Four panel mount dc power jacks joins firm’s ac-dc adapter product line. Featuring industry standard sizes of 5.5mm x 2.1mm and 5.5mm x 2.5mm, devices are available with both .437 inch as well as .313 inch mounting hole sizes.…
August 3, 2015 by Stephen Law

Miniature connectors mix signal,power contacts

Positronic Dragonfly range of reliable, miniature connectors with power and/or signal contacts are configurable with size 16, 20 or 22 contacts. Devices can handle currents up to 20A per contact, provide blind mating, sequential mating, float mount, panel mount and…
August 1, 2015 by Stephen Law

Crimp-to-wire connector enables contact pitch compatibility

FCI Minitek MicroSpace 1.27/1.5mm Crimp-to-Wire (CtW) connector enables contact pitch compatibility with the LV214 Severity-2 standard. Devices are suitable when high vibration endurance is required. Design provides primary and secondary contact retention, Poka-yoke polarization and a visual mismatch prevention system…
July 30, 2015 by EP&T Magazine

Motor terminal blocks deliver flexibility

MORGAN ADVANCED MATERIALS Motor terminal blocks come in a range of designs to meet custom requirements. Utilizing glass fiber reinforced polyester compression molded components and pins suited to a wide variety of applications, devices are used for electric grid connection of…
July 29, 2015 by EP&T Magazine

Intrinsically safe pressure transmitters and load cells are FM rated

OMEGA Intrinsically safe pressure and load products are FM rated for use in hazardous locations. Available in many options of pressure ranges/capacities, electrical terminations, connector options and cable options, including a submersible waterproof cable. Devices are high-accuracy, stainless steel construction, specifically…
July 27, 2015 by EP&T Magazine

Disposable connectors meet disposable medical needs

FISCHER CONNECTORS Push-pull circular connectors and cable assemblies for medical device manufacturers are designed to be disposable after a small number of uses. Devices are cost effective, yet do not compromise on quality. Whether directly mounted in a disposable hand piece,…
July 25, 2015 by EP&T Magazine

Fiber optic cabling VAR program now available

HIROSE ELECTRIC has developed a fiber optic cabling value-added reseller (VAR) program to complement the extensive line of ruggedized connectors to deliver complete fiber optic solutions for a wide range of commercial, data com / networking, medical, military/aerospace, surveillance and telecommunication…
July 21, 2015 by EP&T Magazine

Combo-D mixed power/signal connector is waterproof

POSITRONIC WCBD Series waterproof version of firm’s Combo-D mixed power/signal connector family. Device mixes power and signal in a single connector body capable of up to 40 amps per size 8 contact. Product’s IP67 rating ideal for non-sheltered/outdoor environments. Device provides…