DAILY NEWS Apr 26, 2014 7:00 AM - 0 comments

VESA and MIPI Alliance adopt display stream compression standard

Video compression protocol developed for mobile devices, future 8K displays

TEXT SIZE bigger text smaller text
2014-04-26

The Video Electronics Standards Association (VESA), working in liaison with the MIPI Alliance, announce the finalization and availability of the Display Stream Compression (DSC) Standard, version 1.0.

VESA developed the DSC standard as an industry-wide compression standard for video interfaces, offering visually lossless performance and low latency. DSC has been adopted into VESA’s embedded DisplayPort (eDP) v1.4 and into MIPI Display Serial Interface (DSI) Specification v1.2, which are used for embedded display interfaces within mobile systems, including smartphones, tablets and laptops. It is anticipated that the DSC standard will also be used for external display interfaces to computer monitors and televisions.

Increasing display resolution and higher refresh rates present challenges for small-display mobile devices and laptops, as well as large external displays. As display resolutions increase, the interface payload capacity must increase either with more power-consuming bandwidth, video data compression, or both. Displays going beyond 4K resolutions will push the video data rate beyond the current limits of the interface standards. For example, standard 1080p displays require a video data rate of 3.5 gigabits/sec; 4K displays at 60Hz require 14 gigabits/sec; and future 8K displays will require over 50 gigabits/sec. VESA’s DSC standard version 1.0 enables up to 66 percent data rate reduction, extending battery life in mobile systems and laptops, while simplifying the electrical interface requirements for future 4K and 8K displays.

“VESA recognized the need for display interface compression in mobile devices to extend battery life without compromising visual quality,” said Dale Stolitzka, VESA Display Stream Compression Task Group Chairman and member of Samsung Display America Laboratory. “In addition, on-going development of DisplayPort standards, which includes 8K resolution support, foresaw the need for compression because of inherent limits in the existing display interface cables. VESA realized that compression was becoming a common need in the industry, and that a standard compression coding system could meet these common display interface needs.”



Request Reprint

Horizontal ruler

Horizontal Ruler

Post A Comment

Disclaimer
Note: By submitting your comments you acknowledge that Electronic Products and Technology has the right to reproduce, broadcast and publicize those comments or any part thereof in any manner whatsoever. Please note that due to the volume of e-mails we receive, not all comments will be published and those that are published will not be edited. However, all will be carefully read, considered and appreciated.

Your Name (this will appear with your post) *

Email Address (will not be published) *

Comments *



* mandatory fields